LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1989 >> Sentra Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Disc Brake Pads >> Removal

Front Disc Brake Pads: Removal

  1. Raise and support front of vehicle. Remove wheel assembly. Remove bottom guide pin. Rotate caliper body upward on guide pin.
  2. Remove pad retainers, shims and brake pads. Note pad condition and location for proper installation (if reusable). Minimum pad thickness is .080" (2.0 mm) for all models.