LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1989 >> Sentra Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Front Disc Brake Caliper >> Disassembly

Front Disc Brake Caliper: Disassembly

  1. Drain brake fluid from caliper body and clean exterior of caliper assembly. Remove pin bolts and separate caliper body from caliper mount.
  2. Remove pad retainers and pads. Force piston(s) and dust seal(s) out of bore by applying low pressure compressed air to brake inlet.
WARNING: Gradually increase air pressure so piston does not fly out and cause personal injury or component damage.
scientia non olet · About LEMON Manuals