Brake System (Complete): Remove & Replace

Includes: Replace Calipers and/or Wheel Cylinders, Brake Shoes and/or Pads. Clean, lube and/or replace Brake Hardware as necessary. Inspect Master Cylinder, all Hoses and bleed Brake System. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All Wheels,w/Rear Disc Brakes		2.6		B
All Wheels,w/Rear Drum Brakes		3.0		B
Combination Procedure: AXLE SEAL: Replace:
Rear,Both		0.8		B
Rear,One Side		0.6		B
Combination Procedure: BRAKE HOSE: Replace:
Each		0.1		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: DISC ROTOR: Remove & Install or Remove & Replace:
4WD, Front	Includes: Repack Wheel Bearings.	1.1		B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing:
4WD, Front,Each	Includes: Repack Wheel Bearings.	1.0		B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
Each Side		0.5		B
Combination Procedure: WHEEL BEARING: Repack:
4WD, Front,Both Sides		2.0		B
Combination Procedure: WHEEL BEARING: Replace:
4WD, Front,One Side	Includes: Repack Wheel Bearings.	1.1		B