Intake Manifold: Removal

WARNING: This page is about a different car, the 1988 Nissan 300ZX. However, it is still accessible from the selected car via links, so may be relevant.

Bleed off fuel pressure. Disconnect battery and drain cooling system. Disconnect vacuum and coolant lines attached to intake manifold and label accordingly. Remove throttle linkage. Remove collector cover and collector. See Fig 1.

Fig 1: Intake Collector Removal Sequence
Courtesy of NISSAN MOTOR CO., U.S.A.
Disconnect fuel line and components that interfere with removal. Remove intake manifold bolts using removal sequence. See Fig 2. Remove intake manifold and fuel injector fuel lines as an assembly.

Fig 2: Intake Manifold Removal Sequence

Courtesy of NISSAN MOTOR CO., U.S.A.