Pistons, Pins, & Rings Specifications
WARNING: This page is about a different car, the 1988 Nissan 300ZX. However, it is still accessible from the selected car via links, so may be relevant.
PISTONS, PINS, & RINGS SPECIFICATIONS
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Piston Clearance | .0010-.0018 (.025-.046) | ||||
| Pins | |||||
| Piston Fit | (1) .0003-.0015 (.008-.039) | ||||
| Rod Fit | .0002-.0007 (.005-.017) | ||||
| Rings | |||||
| Ring No. 1 | |||||
| End Gap | .008-.017 (.20-.44) | ||||
| Side Clearance | .0016-.0029 (.04-.073) | ||||
| Ring No. 2 | |||||
| End Gap | .007-.017 (.18-.44) | ||||
| Side Clearance | .0012-.0025 (.030-.063) | ||||
| Oil Ring | |||||
| End Gap | .008-.030 (.20-.76) | ||||
| Side Clearance | .0006-.0075 (.015-.190) | ||||
|
|||||