LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1986 >> D21 Hardbody 4WD V6-2960cc 3.0L SOHC (VG30i) >> Repair and Diagnosis >> Technical Service Bulletins >> All Technical Service Bulletins >> Shock Absorbers - Identification

Shock Absorbers - Identification

87nissan07

Models 1986.5-1987 Truck (D21)

Section Front Axle & Suspension

Classification FA87-006

Bulletin No. TS87-171

Date November 23, 1987
REPLACEMENT SHOCK ABSORBERS


APPLIED MODEL: 1986.5-1987 Truck (D21)

SERVICE INFORMATION

Japan and U.S. built 1986.5-87 D21 Trucks do not use the same shock absorbers. When replacing them, be sure to identify the origin of the vehicle before ordering parts.
^ On Japan built vehicles, the first VIN digit is "J".
^ On U.S. built vehicles, the first VIN digit is "1".

The shock absorbers are interchangeable in axle sets only.

PARTS INFORMATION


PART NUMBERS
PART DESCRIPTION JAPAN BUILT U.S. BUILT
^ Front shock 2WD, Reg. cab & King cab
(except heavy duty and cab & chassis) 56110-01G25 56110-S3825
^ Front shock 2WD, Heavy duty/cab & chassis 56110-25G25 56110-S3826
^ Front shock 4WD 56110-31G25 56110-S4325
^ Rear shock 2WD, Reg. cab & King cab
(except heavy duty and cab & chassis) 56210-01G25 56210-S3825
^ Rear shock 2WD, Heavy duty/cab & chassis 56210-25G25 56210-S3826
^ Rear shock 4WD 56210-31G25 56210-S4325