Engine - Oil Leak From rear
86nissan05Models 1986.5 D21 Truck
Section Engine
Classification EN86-002
Bulletin No. TS86-043
Date March 28, 1986
ENGINE OIL LEAK, 1986.5 TRUCK - SERVICE ADVISORY
APPLIED MODEL: 1986.5 Truck with VG30 (V6) engine
SERVICE INFORMATION
Some 1986.5 Trucks equipped with the VG30 engine may exhibit an engine oil leak from the rear of the engine. This leak may be due to a poor seal at the oil pressure switch. Check the seal at the oil pressure switch before replacing the rear oil seal or oil pressure switch. Use the Service Procedure below to repair an oil leak at this seal.
SERVICE PROCEDURE
1. Remove the oil pressure switch from the engine block. Clean off oil from the threads of the switch and the threads in the engine block.
2. Apply Teflon tape or equivalent to the threads of the oil pressure switch.
3. Install the switch into the block and torque to 7 - 12 ft.lbs. (1.0 - 1.6 kg-m).