Differential Assembly
| <1986> | <1986 1/2> | ||
| Carrier Type | - Note: 2WD with single rear wheels, removable; 2WD with dual rear wheels and 4WD, integral. | - Note: 4WD w/Z24i engine, integral; exc. 4WD w/Z24i engine, removable. | |
| Ring Gear & Pinion Backlash | Method | Shim | - Note: With VG30i engine, threaded adjuster; with Z24i engine, shim. |
| Adjustment | - Note: Differential carrier models R180 and C200, .005-.007; models H190A and H190-ML, .006-.008 in. | - Note: VG30i engine, .006-.008 in.; Z24i engine, .005-.007 in. | |
| Pinion Bearing Preload | Method | - Note: Differential carrier model R180, solid spacer and washer; models C200,H190A and H190-ML, collapsible spacer. | - Note: VG30i engine, Adjusting Spacer & Washer; Z24i engine, Collapsible Spacer. |
| Adjustment | - Note: Differential carrier models R180, 7.8-14.8 in lb.; models H190A and H190-ML,9.5-13.9 in lb.; model C200, 9.5-14.8 in lb.. All with seal installed. | - Note: With seal installed: VG30i engine, 4.3-8.7 in lb.; Z24i engine w/2WD,9.5-13.9 in lb.; Z24i engine w/4WD, 9.5-14.8 in lb. | |
| Differential Bearing Preload | Method | Shim | - Note: With VG30i engine, threaded adjuster; with Z24i engine, shim. |
| Adjustment | --- | --- |