Parking Brake System: Adjustments

Parking Brake Cable Adjustment:

1. Loosen lock nut A, rotate adjuster B.

2. Tighten lock nut A.

Parking Brake Lever Adjustment:

3. Pull control lever with specified amount of force. Check lever stroke and ensure smooth operation.

Number of notches:

Center lever type: 10 - 12

Stick lever type: 10 - 12 (2WD) 9-11 (4WD)

Center Lever Type: 7 - 9 (Van and Wagon)

Parking Brake Warning Lamp Switch:

4. Bend parking brake warning lamp switch plate so that brake warning light comes on when ratchet at parking brake lever is pulled "A" notches and goes out when fully released.

NUMBER OF NOTCHES
Truck-
Center lever type: 1
Stick lever type: 2

Van and Wagon-
Center Lever Type: 2