LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1985 >> Stanza GL, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Instrument Panel - Electronic) >> Trouble Shooting >> Gauges >> Fuel Gauge Will Not Reach Full

Fuel Gauge Will Not Reach Full

WARNING: This page is about a different car, the 1985 Nissan Maxima and 1985 Nissan 200SX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check if all segments of fuel gauge light up when fuel tank is full. If so, there is no problem. If not, perform SEGMENT CHECK  . If results of segment check are not okay, replace display unit. If results are okay, proceed to step 2).
  2. Measure resistance of fuel tank sending unit. To do so, turn ignition switch to "OFF" position. Remove instrument cluster and disconnect wire harness connector from control unit. Measure resistance between terminal No. 13 (+) and No. 15 (-). If results are not okay, replace fuel tank sending unit. If good results are obtained, replace control unit.