LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1985 >> Stanza GL, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL Turbo - VIN [C] & 2.0L 4-CYL - VINS [H,P] >> Overhaul >> Piston & Rod Assembly >> Removal

Piston & Rod Assembly: Removal

  1. With cylinder head and oil pan removed, remove connecting rod nuts. Remove rod cap with bearing half. Check top of cylinder bore for ridge. If scraper will not remove carbon build-up, remove using ridge reamer.
  2. Push piston and rod assembly, with bearing half, out through top of block. Rod caps must be kept with their respective piston and rod assembly and are not interchangeable.
scientia non olet · About LEMON Manuals