Power Brake Unit: Installation
- To install, reverse removal procedure and check push rod length, operating rod length and pedal height. See Fig 1 . If not to specification, replace power brake unit.
- Adjust operating rod length by loosening lock nut and turning operating rod to attain proper length. Tighten lock nut and clevis. Bleed hydraulic system.
PUSH ROD & OPERATING ROD LENGTHS
| Application | Push Rod In. (mm) | Operating Rod In. (mm) |
|---|---|---|
| Pulsar NX & Sentra | 5.91 (150) | .405-.414 (10.28-10.53) |
| Stanza | 5.12 (130) | .405-.414 (10.28-10.53) |