BSW-Ecu (Master) (Connector: G-25)
| Terminal No. | Terminal code | Check item | Check condition | Normal condition |
|---|---|---|---|---|
| 1 | IG | ECU power supply (Ignition switch: IG1) | Ignition switch: ON | Battery positive voltage |
| Ignition switch: OFF | 1 V or less | |||
| 2 | AN1 | Blind spot warning light (LH) | Blind spot warning light (LH) is ON. | Battery positive voltage |
| 3 | - | - | - | - |
| 4 | CNH1 | CAN-H | - | - |
| 5 | CNH2 | Local CAN-H | - | - |
| 6 | GND | GND | Always | 1 V or less |
| 7 | - | - | - | - |
| 8 | - | - | - | - |
| 9 | CNL1 | CAN-L | - | - |
| 10 | CNL2 | Local CAN-L | - | - |