| Power supply to the BSW-ECU (master) fails [Cannot communicate with BSW-ECU (master) using the scan tool (M.U.T.-III)] |
1 |
|
| Power supply to the BSW-ECU (slave) fails [Cannot communicate with BSW-ECU (master) using the scan tool (M.U.T.-III)] |
2 |
|
| The system is not turned on and off by operating the blind spot warning switch. |
3 |
|
| Although no vehicle is present within a detection area, the blind spot warning light on door mirror illuminates. (illuminates incorrectly) |
4 |
|
| Although any vehicle is present within a detection area, the blind spot warning light on door mirror does not illuminate. (the system is on) |
5 |
|