Actuator Test Table
NOTE:
*: Only applicable to the BSW-ECU (master).
| Item No. | Item name [Scan tool (M.U.T.-III) indication] | Test item [Scan tool (M.U.T.-III) indication] | Test contents |
|---|---|---|---|
| 1 | Mirror indicator | OFF | Turns on/off the blind spot warning indicator light on door mirror. |
| ON | |||
| 2* | BSW indicator | OFF | Makes the blind spot warning indicator light on the combination meter go out or illuminate. |
| ON | |||
| 3* | Meter indication (BSW status) | OFF | Modifies the BSW status forcibly. |
| No request | |||
| Temporary fail | |||
| Fail | |||
| Blockage | |||
| 4* | BSW buzzer | OFF | Stops the BSW tone alarm in the combination meter. |
| Warning buzzer | Sounds the BWS warning tone alarm in the combination meter. | ||
| 5* | Meter indication (RCTA warning) | No request | Erases the RCTA warning indication on the combination meter. |
| Both warning | Displays RCTA warning indication on the combination meter. | ||
| 6* | RCTA buzzer | OFF | Stops the RCTA tone alarm in the combination meter. |
| Warning buzzer | Sounds the RCTA warning tone alarm in the combination meter. | ||
| 7 | BSW ON/OFF setting | No request | Changes the BSW setting to reset. |
| OFF | Changes the BSW setting to OFF. | ||
| ON | Changes the BSW setting to ON. |