Diagnostic Trouble Code Chart
CAUTION:
During diagnosis, a DTC associated with another system may be set when the ignition switch is turned on with connector(s) disconnected. After completing the repair, confirm all systems for DTC(s). If DTC(s) are set, erase them all.
| Diagnostic trouble code No. |
Diagnostic item |
Reference |
| B10C0 |
Interior temperature sensor SHT |
|
| B10C1 |
Interior temperature sensor open |
| B1003 |
A/C mode SW |
Refer to
DIAGNOSTIC TROUBLE CODE CHART |
| B1018 |
Temperature setting SW |
| B1021 |
Blower fan SW |
| B1031 |
Air thermo sensor circuit low |
| B1032 |
Air thermo sensor circuit high |
| B1034 |
Ambient temperature sensor low |
| B1035 |
Ambient temperature sensor high |
| B1079 |
A/C refrigerant leak |
| U0019 |
Bus error (CAN-B) |
| U0141 |
ETACS CAN timeout |
| U0151 |
SRS-ABG CAN timeout |
| U0154 |
OCM CAN timeout |
| U0155 |
Meter CAN timeout |
| U0168 |
WCM/F.A.S.T. CAN timeout |
| U1000 |
OSS/F.A.S.T._OSS CAN timeout |
| U1415 |
Coding not completed/Data fail |