LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2019 >> Eclipse Cross SP >> Repair and Diagnosis >> Engine Performance >> System >> Emission Control >> Evaporative Emission Canister And Fuel Tank Pressure Relief Valve >> Inspection >> Evaporative Emission Ventilation Solenoid Check

Evaporative Emission Ventilation Solenoid Check

  1. Connect a hand vacuum pump to nipple of the evaporative emission canister and evaporative emission ventilation solenoid assembly.
    G12147145Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Check air tightness by applying a vacuum with voltage applied directly from the battery to the evaporative emission ventilation solenoid and without applying voltage.
    Battery voltage Normal condition
    Applied Vacuum maintained
    Not applied Vacuum leaks
    G12147146Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Measure the resistance between the terminals of the solenoid.

    Standard value: 55 - 63 Ω at 20°C (68°F) 

    G12147147Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals