Diagnostic Trouble Code Chart
CAUTION:
On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnostic trouble code(s) associated with other system may be set. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
ETACS-ECU
| DTC No. | Diagnostic item |
|---|---|
| B16A2 | Blown turn-signal light (LH) bulb |
| B16A3 | Turn-signal light (LH) short circuit |
| B16A4 | Blown turn-signal light (RH) bulb |
| B16A5 | Turn-signal light (RH) short circuit |
| B1E25 | Multichannel Driver CH1 Defective (Open/Short) |
LIN
| DTC No. | Diagnostic item | ||
|---|---|---|---|
| L0434 | RLS(1) light sensor error | ||
| L0436 | RLS(1) rain sensor error | ||
| L0444 | RLS(1) Battery voltage high error | ||
| L0446 | RLS(1) Battery voltage low error | ||
|
|||