Inspection Procedure 2: The sunshade does not open: Diagnosis
- STEP 1. Connector check: E-15 sunshade switch connector
Q: Is the check result normal?
YES: Go to Step 2.
NO: Repair the damaged connector.
- STEP 2. Sunshade switch check
Refer to SUNSHADE SWITCH CHECK .
Q: Is the sunshade switch normal?
YES: Go to Step 3.
NO: Replace the sunshade switch.
- STEP 3. Connector check: E-11 sunshade motor assembly connector
Q: Is the check result normal?
YES: Go to Step 4.
NO: Repair the damaged connector.
- STEP 4. Wiring harness check between E-15 sunshade switch connector terminal No. 5 and E-11 sunshade motor assembly connector terminal No. 8
- Check the input/output line for open circuit.
Q: Is the check result normal?
YES: Go to Step 5.
NO: Repair the wiring harness.
- STEP 5. Retest the system.
Check that the sunshade lid opens.
Q: Is the check result normal?
YES: Intermittent malfunction (Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTIONS .)
NO: Replace the sunshade motor assembly.