Trouble Symptom Chart For Input Signal
| Trouble symptom | Inspection Procedure No. | Reference | |
|---|---|---|---|
| ETACS-ECU does not receive any signal from the ignition switch (ACC). | 1 | ||
| ETACS-ECU does not receive any signal from the ignition switch (IG1). | 2 | ||
| ETACS-ECU does not receive any signal from the key reminder switch. | 3 | ||
| ETACS-ECU cannot receive the signal of front door lock actuator (LH) or front door lock actuator (RH). | 4 | ||
| ETACS-ECU does not receive any signal from the front door switch (LH). | 5 | ||
| ETACS-ECU does not receive any signal from the front door switch (RH). | 6 | ||
| ETACS-ECU does not receive any signal from the rear door switch (LH). | 7 | ||
| ETACS-ECU does not receive any signal from the rear door switch (RH). | 8 | ||
| ETACS-ECU does not receive any signal from the liftgate latch switch. | 9 | ||
| ETACS-ECU does not receive any signal from the hood latch switch. | 10 | ||
| ETACS-ECU does not receive any signal from the hazard warning light switch. | 11 | ||
| ETACS-ECU does not receive any signal from the column switch signal. | 12 | ||
| ETACS-ECU does not receive any signal from the stoplight switch. | Vehicles without stop light relay | 13 | INSPECTION PROCEDURE 13: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE STOPLIGHT SWITCH. <VEHICLES WITH STOP LIGHT RELAY> |
| Vehicles with stop light relay | |||
| ETACS-ECU does not receive any signal from the remote controlled mirror switch (fold switch). | 14 | ||
| ETACS-ECU does not receive any signal from the windshield washer tank fluid level sensor. | 15 | ||