LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2018
>>
Outlander Sport LE, FWD
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Collision/Avoidance
>>
Forward Collision Mitigation/Lane Departure Warning System (FCM) (LDW) - (With Diagnostics)
Forward Collision Mitigation/Lane Departure Warning System (FCM) (LDW) - (With Diagnostics)
Expand All (for easy ctrl-f)
Collapse All
General Information
Notes
Construction Diagram
Schematic Diagram
Notes
Fail-safe and self-diagnosis functions
Sensor calibration
Forward Collision Mitigation (FCM)
Function
Operation
FCM And LDW On/Off Switch
Notes
How to switch on and off the FCM
How to switch the FCM warning timing
Automatic High Beam System
Notes
Operation
When an oncoming vehicle is approaching
When you overtake a preceding vehicle or the system misses it
Operation conditions for the automatic high beam system
Switching conditions between headlight low-beam and high-beam
Lane Departure Warning System (LDW)
Operation
Operation status (LDW: ON)
Warning monitor status (Standby)
Warning (WARNING L-LANE or WARNING R-LANE)
Variable warning range
Deactivating the warning
Disabling the warning
Resuming the warning
Special Tools
Diagnosis
Standard Flow Of Diagnostic Troubleshooting
Diagnosis Function
How To Connect The Scan Tool (M.U.T.-III)
How To Read And Erase Diagnostic Trouble Codes
How To Diagnose The Can Bus Lines
Check Of Freeze Frame Data
Fail-Safe Functions
Notes
Illumination condition of display in case of failure
Diagnostic Trouble Code Chart
Data List Reference Table
Notes
What the FCM/LDW/AHB-ECU monitors
Check At Ecu Terminal
On-Vehicle Service
FCM/LDW/AHB-Ecu Sensor Calibration
Notes
Explanation of diagnostic trouble code, and remedy
FCM/LDW/AHB-Ecu
Removal And Installation
Notes
Installation Service Point
DW/AHB-Ecu Installation