LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transaxle On-Vehicle Service) >> Transaxle Assembly >> Removal And Installation >> Removal Service Points >> << A >> Clutch Tube Removal

<< A >> Clutch Tube Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Do not remove the O-rings and the clips from the clutch tube and the concentric slave cylinder adapter.
  • If the O-rings or the clips of the clutch tube and the concentric slave cylinder adapter are damaged, replace each assembly.
Fig 1: Identifying Clutch Tube Assembly And Concentric Slave Cylinder
G05903875Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals