LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Rear Axle (Fwd) - Lancer) >> Rear Axle Hub Assembly >> Removal And Installation >> Removal Service Point >> << B >> Rear Wheel Hub Assembly Removal

<< B >> Rear Wheel Hub Assembly Removal

WARNING: This page is about a different variant/trim than selected.
  1. If the rear wheel hub assembly is seized with the knuckle, use special tools MB990211 and MB990241 {combination (A)}, or MB990211 and MB991354 {combination (B)} to remove the rear wheel hub assembly.
    Fig 1: Removing Rear Wheel Hub Assembly (Combination A)
    G05394418Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Removing Rear Wheel Hub Assembly (Combination B)
    G05394419Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals