LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Twin Clutch-SPORTRONIC Shift Transmission (TC-SST) - With Diagnostics - Lancer (5 Of 6)) >> Diagnosis < Shift Lever > >> Data List Reference Table

Data List Reference Table

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Item No. Display on scan tool Check conditions Normal conditions
1 Lever position Shift lever position Shift lever position: P P
Shift lever position: R<==>P R-P
Shift lever position: R R
Shift lever position: N<==>R N-R
Shift lever position: N N
Shift lever position: D<==>N D-N
Shift lever position: D D
Shift lever position: Manual mode Manual
Shift lever position: Upshift and hold +
Shift lever position: Downshift and hold -
3 Battery voltage (CAN data) Ignition switch: ON Battery voltage (12 V)
4 Back light voltage Ignition switch: ON Shift lever position: R 20 - 120 digits
Shift lever position: Other than above 10 digits or less
5 Shift lock voltage Ignition switch: ON
  • Shift lever position: P
  • Brake pedal: Depressed
 500 digits or more
Shift lever position: Other than above 100 digits or less
6 Battery voltage Ignition switch: ON 520 - 920 digits
7 Shift indicator voltage (D range) Ignition switch: ON Shift lever position: D 10 - 370 digits
Shift lever position: Other than above 10 digits or less
8 Shift indicator voltage (M mode) Ignition switch: ON Shift lever position: Manual mode 10 - 370 digits
Shift lever position: Other than above 10 digits or less
9 Shift indicator voltage (N range) Ignition switch: ON Shift lever position: N 10 - 370 digits
Shift lever position: Other than above 10 digits or less
10 Shift indicator voltage (P range) Ignition switch: ON Shift lever position: P 10 - 370 digits
Shift lever position: Other than above 10 digits or less
11 Shift indicator voltage (R range) Ignition switch: ON Shift lever position: R 10 - 370 digits
Shift lever position: Other than above 10 digits or less
16 Shift indicator PWM(1) (Day) Ignition switch: ON 100%
17 Shift indicator PWM(1) (Night) Ignition switch: ON 20%
20 ILL+ Ignition switch: ON Headlight (taillight): ON ON
Headlight (taillight): OFF OFF
23 Ignition SW Ignition switch: ON ON
Ignition switch: START START
24 Shift position
  • Shift lever position: Manual mode
  • Driving at a constant speed in 1st
 1st
  • Shift lever position: Manual mode
  • Driving at a constant speed in 2nd
 2nd
  • Shift lever position: Manual mode
  • Driving at a constant speed in 3rd
 3rd
  • Shift lever position: Manual mode
  • Driving at a constant speed in 4th
 4th
  • Shift lever position: Manual mode
  • Driving at a constant speed in 5th
 5th
  • Shift lever position: Manual mode
  • Driving at a constant speed in 6th
 6th
Ignition switch: ON Shift lever position: D D
Shift lever position: N N
Shift lever position: P P
Shift lever position: R R
  • Shift lever position: D
  • Driving at a constant speed in 1st
 D1
  • Shift lever position: D
  • Driving at a constant speed in 2nd
 D2
  • Shift lever position: D
  • Driving at a constant speed in 3rd
 D3
  • Shift lever position: D
  • Driving at a constant speed in 4th
 D4
  • Shift lever position: D
  • Driving at a constant speed in 5th
 D5
  • Shift lever position: D
  • Driving at a constant speed in 6th
 D6
25 Vehicle speed Driving at a constant speed of 20 km/h 20 mph
30 Drive mode SW (output data) Ignition switch: ON Switch position: Operate the switch toward the front of the vehicle, and hold it +
Switch position: Operate the switch toward the back of the vehicle, and hold it -
Switch position: Other than above Not active
32 Lever position (output data) Ignition switch: ON Shift lever position: P P
Shift lever position: R<==>P R-P
Shift lever position: R R
Shift lever position: N<==>R N-R
Shift lever position: N N
Shift lever position: D<==>N D-N
Shift lever position: D D
Shift lever position: Manual mode Manual
Shift lever position: Upshift and hold +
Shift lever position: Downshift and hold -
(1) PWM indicates the duty value (ratio).
scientia non olet · About LEMON Manuals