Freeze Frame Data Check
WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Data of when the diagnostic trouble code is determined is obtained, and the status of ACD is stored. By analyzing each data using the scan tool, troubleshooting can be carried out efficiently.
Display items of the freeze frame data are as follows.
DISPLAY ITEM LIST
| Item No. | Item | Unit/display |
|---|---|---|
| 1 | Odometer | km |
| 2 | Ignition cycle | Count |
| 4 | Current trouble accumulative time | min |
| 5 | ACD control mode (for meter display) |
|
| 6 | ASC control mode |
|
| 8 | Stoplight switch |
|
| 9 | Parking brake switch |
|
| 10 | ABS activation flag |
|
| 11 | Steering wheel sensor | deg |
| 12 | Accelerator opening angle | % |
| 13 | Wheel speed sensor < FL > | km/h |
| 14 | Wheel speed sensor < FR > | km/h |
| 15 | Wheel speed sensor < RL > | km/h |
| 16 | Wheel speed sensor < RR > | km/h |
| 18 | Yaw rate sensor | deg/s |
| 19 | Lateral G-sensor | m/s2 |
| 20 | Longitudinal G-sensor | m/s2 |
| 21 | ACD target torque | Nm |