LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Twin Clutch-SPORTRONIC Shift Transmission (TC-SST) - With Diagnostics - Lancer (6 Of 6)) >> Transaxle Case Oil Seal >> Removal And Installation >> Installation Service Points >> >> C << Transaxle Case Oil Seal (LH) Installation

>> C << Transaxle Case Oil Seal (LH) Installation

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the transaxle oil to the oil seal guide (special tool: MB992311). Insert the oil seal to oil seal guide (special tool: MB992311).
    Fig 1: Inserting Oil Seal To Oil Seal Guide Using Special Tool (MB992311)
    G06471506Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Use special tool oil seal installer (special tool: MB992310) to install the oil seal to the transaxle case.
    Fig 2: Installing Oil Seal To Transaxle Case Using Special Tool MB992310
    G06471507Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals