LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Twin Clutch-SPORTRONIC Shift Transmission (TC-SST) - With Diagnostics - Lancer (6 Of 6)) >> Oil Cooler >> Removal And Installation >> Notes

Removal And Installation: Notes

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not refill the fluid when replacing the transaxle assembly and the oil cooler with new ones at the same time.
NOTE:
  • The new transaxle assembly is filled with 7.6 dm3 (8.0 qt) of the fluid (including the oil cooler).
  • The transaxle assembly has a sealed structure, and the fluid does not drain out from parts other than the oil cooler hose.
Fig 1: Removing/Installing Oil Cooler With Torque Specification
G09626003Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals