LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Twin Clutch-SPORTRONIC Shift Transmission (TC-SST) - With Diagnostics - Lancer (6 Of 6)) >> Hydraulic Unit >> Removal And Installation >> Installation Service Points >> >> A << Reservoir Hose Assembly Installation

>> A << Reservoir Hose Assembly Installation

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the oil reservoir side, insert the hose to the position shown in the illustration.
  2. On the hydraulic unit side, insert the hose to the spool shown in the illustration.
    Fig 1: Identifying Oil Reservoir Hose Dimension
    G06677535Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals