OBD-II Drive Cycle Pattern < Functional Check - Shift Fork 3 Requested But Shift Fork 4 Movement >
WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
The status of the shift fork position -6 mm (-0.24 inch) [6th gear side] or less, or with 1.8 mm (0.071 inch) [neutral position] or less and with the initialized fork position - shift fork 3 position 2.5 mm (0.098 inch) or more continues for 200 millisecond.