OBD-II Drive Cycle Pattern
< TARGET CLUTCH 1 (ODD) PRESSURE: 3, 000 HPA OR MORE >
The calculated pressure remains -5, 000 hPa or more for specified time*.
*: Specified time
The specified time for the "Rationality-high" monitor depends on the transmission fluid temperature, the shift lever position.
| Shift lever position | Transmission fluid temperature | Specified time |
|---|---|---|
| "D → N" or "R → N" or "R → P" | >= -10 °C (14 °F) | 1, 220 msec |
| < -10 °C (14 °F) | 2, 220 msec | |
| "N" or "P" | All range | 220 msec |
| "R" or "D" or manual mode | <= -10 °C (14 °F) | 3, 220 msec |
| > -10 °C (14 °F) | 2, 220 msec |
Example of the specified time
- When the shift lever position is P: The specified time is always 220 msec.
- When the shift lever position is "R → N":
If the transmission fluid temperature is -10 °C (14 °F) or more, the specified time is 1, 220 msec.
If the transmission fluid temperature is lower than -10 °C (14 °F), the specified time is 2, 220 msec.
- When shift lever position is D:
If the transmission fluid temperature is -10 °C (14 °F) or less, the specified time is 3, 220 msec.
If the transmission fluid temperature is higher than -10 °C (14 °F), the specified time is 2, 220 msec.
< TARGET CLUTCH 1 (ODD) PRESSURE: 1, 400 HPA OR MORE TO 3, 000 HPA OR LESS >
The calculated pressure remains -2, 000 hPa or more for specified time*.
*: Specified time
The specified time for the "Rationality-high" monitor depends on the transmission fluid temperature, the shift lever position.
| Shift lever position | Transmission fluid temperature | Specified time |
|---|---|---|
| "D → N" or "R → N" or "R → P" | >= -10 °C (14 °F) | 1, 220 msec |
| < -10 °C (14 °F) | 2, 220 msec | |
| "N" or "P" | All range | 220 msec |
| "R" or "D" or manual mode | <= -10 °C (14 °F) | 3, 220 msec |
| > -10 °C (14 °F) | 2, 220 msec |
Example of the specified time
- When the shift lever position is P: The specified time is always 220 msec.
- When the shift lever position is "R → N":
If the transmission fluid temperature is -10 °C (14 °F) or more, the specified time is 1, 220 msec.
If the transmission fluid temperature is lower than -10 °C (14 °F), the specified time is 2, 220 msec.
- When shift lever position is D:
If the transmission fluid temperature is -10 °C (14 °F) or less, the specified time is 3, 220 msec.
If the transmission fluid temperature is higher than -10 °C (14 °F), the specified time is 2, 220 msec.
< TARGET CLUTCH 1 (ODD) PRESSURE: 1, 400 HPA OR LESS >
The clutch 1 (odd) pressure remains -1, 000 hPa or more for specified time*.
*: Specified time
The specified time for the "Rationality-high" monitor depends on the transmission fluid temperature, the shift lever position.
| Shift lever position | Transmission fluid temperature | Specified time |
|---|---|---|
| "D → N" or "R → N" or "R → P" | >= -10 °C (14 °F) | 1, 220 msec |
| < -10 °C (14 °F) | 2, 220 msec | |
| "N" or "P" | All range | 220 msec |
| "R" or "D" or manual mode | <= -10 °C (14 °F) | 3, 220 msec |
| > -10 °C (14 °F) | 2, 220 msec |
Example of the specified time
- When the shift lever position is P: The specified time is always 220 msec.
- When the shift lever position is "R → N":
If the transmission fluid temperature is -10 °C (14 °F) or more, the specified time is 1, 220 msec.
If the transmission fluid temperature is lower than -10 °C (14 °F), the specified time is 2, 220 msec.
- When shift lever position is D:
If the transmission fluid temperature is -10 °C (14 °F) or less, the specified time is 3, 220 msec.
If the transmission fluid temperature is higher than -10 °C (14 °F), the specified time is 2, 220 msec.