LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Twin Clutch-SPORTRONIC Shift Transmission (TC-SST) - With Diagnostics - Lancer (1 Of 6)) >> Special Tools

Special Tools

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Tool Tool number and name Supersession Application
G06244449Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991958
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826

M.U.T.-III sub assembly
  1. Vehicle communication interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T.-III main harness B (Vehicles without CAN communication system)
  5. M.U.T.-III main harness C (for Chrysler models only)
  6. M.U.T.-III measurement adapter
  7. M.U.T.-III trigger harness
MB991824-KIT
NOTE: G: MB991826 M.U.T.-III trigger harness is not necessary when pushing V.C.I. ENTER key.
CAUTION: For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
Checking diagnostic trouble codes
G08294095Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB992006
Extra fine probe
- Making voltage and resistance measurement during troubleshooting
G05102584Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MD998330 (Includes MD998331)
Oil pressure gauge (3.0 MPa, 427 psi)
MD998330-01 Measurement of hydraulic pressure
G05393869Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991705 Adapter
G05093219Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991895
Engine hanger
Tool not available When the engine hanger is used: Supporting the engine assembly during removal and installation of the transaxle assembly
G04869564Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991928
Engine hanger
  1. MB991929 Joint (50) x2
  2. MB991930 Joint (90) x2
  3. MB991931 Joint (140) x2
  4. MB991932 Foot (standard) x4
  5. MB991933 Foot (short) x2
  6. MB991934 Chain and hook assembly
Tool not available
G05392349Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB992201
Engine hanger plate
-
G09625748Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB992311
Oil seal guide
- Installation of transaxle case (LH) oil seal
G09625749Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB992310
Oil seal installer
- Installation of transaxle case (LH) oil seal
G09625750Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB992313
Oil seal guide
- Installation of transaxle case (RH) oil seal
G09625751Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB992312
Oil seal installer
- Installation of transaxle case (RH) oil seal
G09625752Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB992314
V ring guide
- Installation of V ring