3. Confirmation of Teach-In operation status
WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Using the data list simultaneously displayed with Teach-In, the execution status and results can be confirmed.
| No. | Data List Item Name | Scan Tool display |
|---|---|---|
| 100 | Teach-In executing | No/Pending/Yes |
| 101 | Normal End | No/Yes |
| 102 | Abnormal End | No/Yes |
| 103 | Timeout error | No/Yes |
| 104 | Abort conditions error | No/Yes |
| 110 | Execute last Teach-In item | The previously conducted scan tool item name is displayed |
| 111 | Internal Error Data | The monitoring unit No. is displayed in case of an error |