TC-SST Teach-In: Notes
WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Check the Diag. Version before Teach-in. If the Diag. Version is 0000, reprogram the ECU. (The software with Diag. Version 0000 does not have Teach-in function.)
- When the mechatronic assembly is replaced, reprogram the ECU and carry out the following Teach-In.
- However, when the mechatronic assembly is replaced, after the reprogramming of the ECU the coding must be carried out before the teach-in.
- When the clutch assembly is replaced, the following Teach-In must be carried out.
- However, when the Diag. Version of TC-SST-ECU is 0001, Item No. 8 is not used.