Section 72 (MULTIPORT Fuel Injection (MFI) - 2.4L - Lancer - Reference Tables, Em Check, On-Vehicle Service, R & I)
WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
- Data List Reference Table
- General Scan Tool (GST) Mode 01 Reference Table
- Actuator Test Reference Table
- Check At The Engine Control Module (ECM)
- Inspection Procedure Using An Oscilloscope
- On-Vehicle Service
- Component Location
- Throttle Body (Throttle Valve Area) Cleaning
- Fuel Pressure Test
- How To Reduce Pressurized Fuel Pressure
- Fuel Tank Pump Operation Check
- MULTIPORT Fuel Injection (MFI) Relay Continuity Check
- Fuel Pump Relay Continuity Check
- Injector Relay Continuity Check
- Throttle Actuator Control Motor Relay Continuity Check
- Intake Air Temperature Sensor Check
- Engine Coolant Temperature Sensor Check
- Linear Air-Fuel Ratio Sensor Check
- Heated Oxygen Sensor Check
- Injector Check
- Throttle Actuator Control Motor Check
- Engine Oil Control Valve Check
- Evaporative Emission Ventilation Solenoid Check
- Evaporative Emission Purge Solenoid Check
- EGR Valve Check
- Check The Brake Override For Correct Function
- Injector
- Throttle Body Assembly
- Engine Control Module (ECM)