<< F >> Manual Control Shaft Removal

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Move the park manual outer lever from D in clock direction to the service position as shown in the illustration.

Fig 1: Locating Park Manual Outer Lever
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Remove the plug.

Fig 2: Identifying Plug
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
When removing the screw located behind the plug, pay attention to the screw not to fall in the transaxle case.
Remove the manual control shaft carefully.

Fig 3: Identifying Transaxle Case
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.