LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Twin Clutch SPORTRONIC Shift Transmission (SST) Overhaul - Lancer) >> Transaxle >> Disassembly And Reassembly >> Removal Service Points >> << B >> Seal Cover Bracket/Seal Cover Removal

<< B >> Seal Cover Bracket/Seal Cover Removal

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seal cover bracket.
    CAUTION:
    • Before removing the seal cover, securely remove metal debris including dusts by air spray.
    • Before removing the seal cover, use the ladder sheet and so forth for the supporting point not to damage the clutching housing.
  2. Remove the seal cover from the transaxle, using the tool such as crowbar.
    Fig 1: Removing Seal Cover From Transaxle Using Tool
    G06471537Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals