LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Twin Clutch SPORTRONIC Shift Transmission (SST) Overhaul - Lancer) >> Transaxle >> Disassembly And Reassembly >> Installation Service Points >> >> K << V Ring Installation

>> K << V Ring Installation

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the spline with a brush or the like.
    Fig 1: Cleaning Spline Using Brush
    G06471504Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Apply the transaxle oil to the special tool V ring guide (MB992314).

    Insert the V ring to the special tool V ring guide (MB992314).

  3. Check that the V ring is installed securely.
    Fig 2: Identifying Special Tool V Ring Guide (MB992314)
    G09626064Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.