LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Twin Clutch SPORTRONIC Shift Transmission (SST) Overhaul - Lancer) >> Transaxle >> Disassembly And Reassembly >> Installation Service Points >> >> I << Transaxle Case Oil Seal (LH) Installation

>> I << Transaxle Case Oil Seal (LH) Installation

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the transaxle oil to the special tool oil seal guide (MB992311).

    Insert the special tool oil seal guide (MB992311).

    NOTE: Do not use special tool oil seal guide (MB992311) without first removing the snap ring from the output shaft.
    Fig 1: Identifying Special Tool Oil Seal Guide (MB992311)
    G09626059Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Use special tool oil seal installer (MB992310) to install the oil seal to the transaxle.
    Fig 2: Identifying Special Tool Oil Seal Installer (MB992310)
    G09626060Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals