LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Twin Clutch SPORTRONIC Shift Transmission (SST) Overhaul - Lancer) >> Transaxle >> Disassembly And Reassembly >> Installation Service Points >> >> F << Seal Ring Installation

>> F << Seal Ring Installation

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not expand the seal ring more than necessary.
  1. Insert the seal ring.
  2. Ensure that the lock is closed completely and it is seated flat into its position.
    Fig 1: Installing Clutch Assembly
    G06471556Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.