LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Twin Clutch SPORTRONIC Shift Transmission (SST) Overhaul - Lancer) >> Fastener Tightening Specification >> Transaxle

Fastener Tightening Specification: Transaxle

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
TRANSAXLE TORQUE SPECIFICATIONS

Item Specification
Oil filter bracket 10 ± 1.5 N.m (89 ± 8 in-lb)
Oil filter case assembly 15 ± 2 N.m (11 ± 1 ft-lb)
Oil pan mounting screw 10 ± 1 N.m (89 ± 8 in-lb)
Seal cover bracket mounting screw 10 ± 1 N.m (89 ± 8 in-lb)
Control cable bracket 11 ± 3 N.m (97 ± 26 in-lb)
Harness bracket 25 ± 4 N.m (18 ± 2 ft-lb)
Harness bracket 25 ± 4 N.m (18 ± 2 ft-lb)