Removal And Installation: Notes

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: The vehicle speed detection encoder collects any metallic particle easily, because it is magnetized. Make sure that the encoder should not collect any metallic particle. Check that there is not any trouble prior to reassembling it.

Fig 1: Removing/Installing Wheel Speed Sensor Components With Torque Specification (Front)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Removing/Installing Wheel Speed Sensor Components With Torque Specification - Rear (FWD)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Removing/Installing Wheel Speed Sensor Components With Torque Specification - Rear (AWD)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

NOTE: The vehicle speed detection encoder is integrated with the front wheel bearing and the rear wheel hub assembly, which cannot be disassembled.