LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Heating, Air Conditioning & Ventilation - With Diagnostics - Lancer) >> On-Vehicle Service >> Power Relay Check >> Blower Relay Continuity Check

Blower Relay Continuity Check

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Battery voltage Tester connection Specified condition
Not applied 3 - 4 Open circuit
  • Connect terminal 1 to the positive battery terminal
  • Connect terminal 2 to the negative battery terminal
 3 - 4 Less than 2 ohms
Fig 1: Identifying Blower Relay
G09631202Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals