LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Heating, Air Conditioning & Ventilation - With Diagnostics - Lancer) >> On-Vehicle Service >> A/C Compressor Clutch Test

A/C Compressor Clutch Test

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the A/C compressor clutch connector to the A/C compressor clutch.
  2. Connect positive battery voltage directly to the connector for the A/C compressor clutch.
  3. Supply a ground to the A/C compressor assembly.
  4. If the A/C compressor clutch is normal, there will be a "click." If the pulley and armature do not make contact ("no click"), there is a malfunction.
    Fig 1: Connecting Compressor Connector Terminal To Battery Positive Terminal
    G09631194Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals