LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Heating, Air Conditioning & Ventilation - With Diagnostics - Lancer) >> Heater Unit And Blower Assembly >> Removal And Installation >> Front Deck CROSSMEMBER Assembly Removal

Front Deck CROSSMEMBER Assembly Removal

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the following connectors to gain access to the front deck crossmember.

Connector number Connector name
C-21 Instrument panel wiring harness and floor wiring harness combination
C-22 Instrument panel wiring harness and floor wiring harness combination
C-26 Instrument panel wiring harness and console wiring harness combination
C-35 Instrument panel wiring harness and floor wiring harness combination
C-36 Instrument panel wiring harness and floor wiring harness combination
C-114 Instrument panel wiring harness and front door wiring harness (RH) combination
C-115 Instrument panel wiring harness and front door wiring harness (RH) combination
C-125 Instrument panel wiring harness and front door wiring harness (LH) combination
C-126 Instrument panel wiring harness and front door wiring harness (LH) combination
C-127 Instrument panel wiring harness and front wiring harness combination
C-128 Instrument panel wiring harness and front wiring harness combination
C-129 Instrument panel wiring harness and front wiring harness combination
C-130 Instrument panel wiring harness and roof wiring harness combination
Fig 1: Identifying Instrument Panel Wiring Harness Driver's Side Combination
G09631206Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Identifying Instrument Panel Wiring Harness Center Console And Passenger Side Combination
G09631207Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals