LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Heating, Air Conditioning & Ventilation - With Diagnostics - Lancer) >> Compressor Assembly >> Disassembly And Assembly >> Assembly Service Points >> Air Gap Adjustment

Air Gap Adjustment

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Check whether or not the air gap of the clutch is within the standard value.

Standard value: 0.25 - 0.45 mm (0.010 - 0.017 inch) 

NOTE: If there is a deviation of the air gap from the standard value, make the necessary adjustment by adjusting the number of shims.
Fig 1: Adjusting Air Gap
G09631226Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals