LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Active Stability Control System (ASC) - With Diagnostics - Lancer) >> On-Vehicle Service >> G And Yaw Rate Sensor Calibration >> Notes

G And Yaw Rate Sensor Calibration: Notes

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before performing calibration, check that the G and yaw rate sensor-related diagnostic trouble code is not set.
CAUTION: After the next operation has been completed, carry out the calibration to make ASC-ECU learn the neutral position of the G and yaw rate sensor.
  • G and yaw rate sensor replacement
  • ASC-ECU replacement
scientia non olet · About LEMON Manuals