LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Active Stability Control System (ASC) - With Diagnostics - Lancer) >> Diagnosis >> Symptom Procedures >> Inspection Procedure 7: ASC warning display and light stays ON after the engine is started >> Operation

Inspection Procedure 7: ASC warning display and light stays ON after the engine is started: Operation

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

ASC-ECU sends the illumination request signal of the ASC warning display and light to the combination meter through ETACS-ECU via the CAN communication.

scientia non olet · About LEMON Manuals