LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Active Stability Control System (ASC) - With Diagnostics - Lancer) >> Diagnosis >> Symptom Procedures >> Inspection Procedure 4: ABS warning light does not illuminate when ignition switch is turned to the ON position (engine stopped) >> Comments On Trouble Symptom

Comments On Trouble Symptom

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

This may be caused by faults in the CAN bus line, ETACS-ECU, combination meter or ASC-ECU.