LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Active Stability Control System (ASC) - With Diagnostics - Lancer) >> Diagnosis >> Symptom Procedures >> Inspection Procedure 1: Scan tool communication with ABS/ASC system is impossible >> Comments On Trouble Symptom

Comments On Trouble Symptom

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

When scan tool cannot communicate with the ABS/ASC system, the CAN bus lines, ASC-ECU power supply circuit system, ground, or ASC-ECU may be faulty.

scientia non olet · About LEMON Manuals