LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Active Stability Control System (ASC) - With Diagnostics - Lancer) >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC U1003: G and yaw rate sensor bus-off >> DTC Set Conditions

DTC Set Conditions

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is set when the communication error occurs in the exclusive CAN bus communication between the ASC-ECU and the G and yaw rate sensor.

scientia non olet · About LEMON Manuals